Technical data

218 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
12 Channel Commands
:CHANnel<N>:PROBe:PRECprobe:MODE
Command :CHANnel<N>:PROBe:PRECprobe:MODE {PROBe | CABLe}
The :CHANnel<N>:PROBe:PRECprobe:MODE command chooses between
PrecisionProbe or PrecisionCable AC response probe calibration.
<N> An integer, 1 - 4.
Example This example chooses PrecisionProbe calibration for the probe on channel
1.
myScope.WriteString ":CHANNEL1:PROBE:PRECprobe:MODE PROBe"
Query :CHANnel<N>:PROBe:PRECprobe:MODE?
The :CHANnel<N>:PROBe:PRECprobe:MODE? query returns the current
PrecisionProbe/PrecisionCable selection for the selected channel.
Returned Format
[:CHANnel<N>:PROBe:PRECprobe:MODE] {PROBe | CABLe}<NL>
See Also • ":CHANnel<N>:PROBe:ACCAL" on page 198
• ":CHANnel<N>:PROBe:PRECprobe:CALibration" on page 217
• ":CHANnel<N>:PROBe:PRECprobe:ZSRC" on page 219
• ":CHANnel<N>:PROBe:PRECprobe:BANDwidth" on page 216