Technical data

Channel Commands 12
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 209
:CHANnel<N>:PROBe:GAIN
Command :CHANnel<N>:PROBe:GAIN {X1 | X10}
The :CHANnel<N>:PROBe:GAIN command sets the 1154A probe input
amplifier gain.
If an 1154A probe is not connected to the channel you will get a settings
conflict error.
<N> An integer, 1 - 4
Example This example sets the probe gain for channel 1 to times 10.
myScope.WriteString ":CHANNEL1:PROBE:GAIN X10"
Query :CHANnel<N>:PROBe:GAIN?
The :CHANnel<N>:PROBe:GAIN? query returns the current probe gain
setting for the selected channel.
Returned Format
[:CHANnel<N>:PROBe:GAIN] {X1 | X10}<NL>
NOTE
This command is valid only for the 1154A probe.