Technical data

Acquire Commands 9
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 147
:ACQuire:INTerpolate
Command :ACQuire:INTerpolate {{ON | 1} | {OFF | 0} | INT1 | INT2 | INT4 | INT8
| INT16}
The :ACQuire:INTerpolate command turns the sin(x)/x interpolation filter
on or off when the oscilloscope is in one of the real time sampling modes.
You can also specify the 1, 2, 4, 8, or 16 point Sin(x)/x interpolation ratios
using INT1, INT2, INT4, INT8, or INT16. When ON, the number of
interpolation points is automatically determined.
Query
:ACQuire:INTerpolate?
The :ACQuire:INTerpolate? query returns the current state of the sin(x)/x
interpolation filter control.
Returned Format
[:ACQuire:INTerpolate] {1 | 0 | INT1 | INT2 | INT4 | INT8 | INT16}<NL>