Technical data

142 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference

9 Acquire Commands

:ACQuire:BANDwidth

(Enhanced bandwidth or noise reduction option only)

Command

:ACQuire:BANDwidth {AUTO | MAX | <bandwidth>}

The :ACQuire:BANDwidth command changes the bandwidth frequency

control for the acquisition system.

• AUTO — The bandwidth is automatically selected based on the sample

rate setting in order to make a good a trade-off between bandwidth,

noise, and aliasing.

• MAX — Sets the oscilloscope to the hardware bandwidth limit and

disables the bandwidth filter.

• <bandwidth> — a real number representing the bandwidth of the

bandwidth filter whose range of values depends on the model number

of your oscilloscope.

NOTE

This command is only available with Enhanced Bandwidth or Noise Reduction options.

Model Bandwidth Filter Values

DSOX/DSAX96204Q The maximum bandwidth down to 1 GHz in 1 GHz increments.

DSOX/DSAX95004Q

DSOX/DSAX93304Q

DSOX/DSAX92504Q

DSOX/DSAX92004Q

DSOX/DSAX93204A The maximum bandwidth down to 1 GHz in 1 GHz increments.

DSOX/DSAX92804A

DSOX/DSAX92504A

DSOX/DSAX92004A

DSOX/DSAX91604A

DSO/DSA91304A 13E09, 12E09, 10E09, 8E09, 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09

DSO/DSA91204A 12E09, 10E09, 8E09, 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09

DSO/DSA90804A 8E09, 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09

DSO/DSA90604A 6E09, 4E09, 3E09, 2.5E09, 2E09, 1E09

DSO/DSA90404A 4E09, 3E09, 2.5E09, 2E09, 1E09

DSO/DSA90254A 2.5E09, 2E09, 1E09