Specifications

30
Infiniium 90000 X-Series Oscilloscopes
Performance characteristics
Acquisition
Maximum real-time sample rate 91304A 91604A 92004A 92504A 92804A 93204A
(2 channels) 80 GSa/s 80 GSa/s 80 GSa/s 80 GSa/s 80 GSa/s 80 GSa/s
(4 Channels) 40 GSa/s 40 GSa/s 40 GSa/s 40 GSa/s 40 GSa/s 40 GSa/s
Memory depth per channel
Standard 20 Mpts on 4 channels 40 Mpts on 2 channels
Option 050 50 Mpts on 4 channels (standard on DSA models) 100 Mpts on 2 channels
Option 100 100 Mpts on 4 channels 200 Mpts on 2 channels
Option 200 200 Mpts on 4 channels 400 Mpts on 2 channels
Option 500 500 Mpts on 4 channels 1 Gpt on 2 channels
Option 01G 1 Gpts on 4 channels 1 Gpt on 2 channels
Option 02G 2 Gpts on 4 channels 2 Gpts on 2 channels
Maxium acquired time at highest real time resolution
Real-time resolution 40 Gsa/s 80 Gsa/s
Standard 0.5 mS 0.5 mS
Option 050 1.25 mS 1.25 mS
Option 100 M 2.5 mS 2.5 mS
Option 200 M 5 mS 5 mS
Option 500 M 12.5 mS 12.5 mS
Option 01G 25 mS 12.5 mS
Option 02G 50 mS 25 mS
Acquisition: digital channels
Maximum real time sample rate 10 GSa/s at 16 channels, 20 GSa/s at 8 channels
Maximum memory depth per
channel
Up to 1 Gpt
Minimum width glitch detection 50 pS
Sampling modes
Real-time Successive single shot acquisitions
Real-time with averaging Averages are selectable from 2 to 65534
Real-time with peak detect 80 GSa/s in half channel mode, 40 GSa/s in full channel mode
Real-time with hi resolution Real-time boxcar averaging reduces random noise and increases resolution
Guassian magnitude,
linear phase
Slower filter roll off while mantaining linear phase
Roll mode Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample
rates up to 10 MSa/s with a maximum record length of 40 Mpts
Segmented memory Captures bursting signals at max sample rate without consuming memory during periods of inactivity
Number of segments (Up to 524,288 with option 02G)
Maximum time between triggers is 562,950 seconds
Re-arm time: 4.5s
Maximum memory depth: Up to 4 Gpts in 1/2 channel mode with option 02G
Filters
Sin(x)/x Interpolation On/off selectable FIR digital filter. Digital Signal Processing adds points between aquired data points to
enhance measurement accuracy and waveform display