Specifications

Compliance and automation testing: Other options on 90000 X-Series oscilloscopes

In the previous pages we have highlighted a few of the key technologies that benefit from the industry’s most accurate oscillo-

scope. The 90000 X-Series offers more than 20 compliance applications, and the list continues to grow. All applications are fully

compatible with InfiniiSim, PrecisionProbe and UDA’s unique add-in capability.

Compliance tools Description Option Standalone

PCI Express gen 1/2/3 Guarantee your PCI Express gen3 designs 044 N5393C

HDMI 2.0 compliance Quickly verify and debug your high-definition multimedia interface 077 N5399C

SAS -2 compliance Automatically execute SAS electrical checklist tests at each of the IT, CT, IR

and CR interface points

043 N5412A

SAS -3 compliance Automatically execute SAS-3 electrical checklist tests 076 N5412C

DisplayPort source

compliance

Verify and debug your DisplayPort interface designs for sink and source ICs,

motherboard systems, computers and graphics cards

045 U7232B

DDR1 verification Save time with automated testing based on JEDEC DDR1 and LPDDR1

specifications

031 U7233A

DDR3 verification Save time with automated testing based on JEDEC DDR3 and LPDDR3

specifications

032 U7231B

DDR2 verification Save time with automated testing based on JEDEC DDR2 and LPDDR2

specifications

033 N5413B

DDR4 verification Save time with automated testing based on JEDEC DDR4 specifications 058 N6462A

MIPI D-Phy verification Execute D-Phy electrical checklist tests for CSI and DSI architectures 035 U7238B

GDDR5 verification Save time with automated testing based on JEDEC GDDR5 specification − U7245A

MIPI M-Phy verification Execute M-Phy electrical tests 047 U7249B

Energy Efficient Ethernet Debug your 1000BASE-T, 100BASE-TX and 10BASE-T Ethernet designs 060 N5392B

10 Gbase-T compliance Coverage of the 10GBASE-T transmitter electrical specifications as described

in section 55.5.3 of IEEE 802.3an-2006

036 U7236A

XAUI compliance XAUI validation with 10GBASE-CX4, CPRI, OBSAI and Serial RapidIO support 030 N5431A

SATA 6G compliance Automated compliance testing for 1.5-Gbps, 3.0-Gbps and 6.0-Gbps SATA and

eSATA transmitter (PHY/TSG/OOB tests)

038 N5411B

User-defined application Fully customizable automated application for your Infiniium oscilloscope 040 N5467A

USB 2.0 compliance USB-IF recognized compliance for low/full and low/full/high-speed USB

automated electrical test

029 N5416A

USB 3.0 compliance Validate and debug your USB 3.0 silicon, host, hub or device 041 U7243A

USB HSIC Validate and debug USB high-speed inter-connect devices 046 U7248A

MHL compliance Validates MHL source designs as found in portable products such as cell

phones and tablets according to the MHL 1.2 standard

054 N6460A

Thunderbolt compliance Measure the transmitter with the accuracy of the 90000 X-Series 059 N6463A