Specifications

Chapter 5: Replacing Assemblies
To remove the backplane assembly from the acquisition/optional MSO assembly
98
6
Use the handles on the acquisition tray to separate the backplane assembly
from each of the acquisition assemblies, and remove the MSO assembly on MSO
models. This step requires some force as the assemblies have numerous
connections and pins.
7 If the scope is an MSO model, carefully guide the cables from the acquisition
boards through the slots in the MSO assembly.
Figure 5-38
8
Remove the M3 screws to remove each board from its respective subassembly
chassis.
9 Note that a new backplane board does not come with the Oscillator and Splitter
Assembly so you will need to move these from the old backplane board to the
new one.