Specifications

Chapter 5: Replacing Assemblies
To remove and replace the motherboard
89
To remove and replace the motherboard
1 Disconnect the power cable and remove the cover and top plate as described
previously.
2 Disconnect all the cables from the motherboard (see page 103).
3 Remove the M3 screws attaching the motherboard to the frame. When installing,
torque to 5 in- lbs.
4 Loosen the four screws in the large fan as shown below.
Figure 5-21
5
Pull the motherboard toward the front panel and then lift out.
To reassemble the motherboard, reverse the above procedure.