Specifications

Chapter 4: Troubleshooting
Checking Probe Power Outputs
70
Checking Probe Power Outputs
Probe power outputs are on the front panel, in the lower left corner of the 3.5mm inputs.
Refer to Figure 4- 19 to check the power output at the connectors. Measure the voltages
with respect to the ground terminal on the front panel, located near Aux Out. Measure
the voltages at pins 2 and 5 only (+12V and - 12V). These supplies, and all others, come
from the front panel.
Figure 4-19 AutoProbe II pins