User`s guide

Setting Up the Oscilloscope
18
2 Connect the probe to the circuit of interest using the browser or other probing
accessories.
Figure 1-4
Probing the Circuit
3 Disconnect the probe.
CAUTION Do not attempt to twist the snap-on probes on or off the oscilloscope’s BNC
connector. Twisting the probe connector body will damage it.
CAUTION Do not exceed the maximum input voltage rating. The maximum input voltage
for the 50 Ω inputs is ±5 Vpeak, CAT I and for the 1 MΩ inputs, it is 150 Vrms
(or dc), CAT I, ±250 V (dc + ac) in ac coupling.
!