Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsIniniium 9000
961962963964965966967968969970
Table Of Contents
970 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
33 Trigger Commands
:TRIGger:TIMeout:CONDition
Command :TRIGger:TIMeout:CONDition {HIGH | LOW | UNCHanged}
This command sets the condition used for the timeout trigger.
HIGH Trigger when the waveform has been high for a period time longer than
the time value which is set by the TRIGger:TIMeout:TIME command.
LOW Trigger when the waveform has been low for a period time longer than the
time value which is set by the TRIGger:TIMeout:TIME command.
UNCHanged Trigger when the waveform has not changed state for a period time longer
than the time value which is set by the TRIGger:TIMeout:TIME command.
Query
:TRIGger:TIMeout:CONDition?
The query returns the currently defined trigger condition for the timeout
trigger.
Returned Format
[:TRIGger:TIMeout:CONDition] {HIGH | LOW | UNCHanged}<NL>