Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsIniniium 9000
961962963964965966967968969970
Table Of Contents
Trigger Commands 33
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 967
:TRIGger:STATe:LTYPe
Command :TRIGger:STATe:LTYPe {AND | NAND}
This command defines the state trigger logic type. If the logic type is set
to AND, then a trigger is generated on the edge of the clock when the
input waveforms match the pattern specified by the :TRIGger:STATe:LOGic
command. If the logic type is set to NAND, then a trigger is generated on
the edge of the clock when the input waveforms do not match the
specified pattern.
Query
:TRIGger:STATe:LTYPe?
The query returns the currently specified state trigger logic type.
Returned Format
[:TRIGger:STATe:LTYPe] {AND | NAND}<NL>