Technical data

Table Of Contents
950 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
33 Trigger Commands
:TRIGger:PWIDth:TPOint
Command :TRIGger:PWIDth:TPOint {EPULse | TIMeout}
This command specifies whether the pulse width trigger should occur at
the end of the pulse or at a specified timeout period. This command is
only available if the pulse direction is set to GTHan.
Query
:TRIGger:PWIDth:TPOint?
The query returns the currently defined trigger on point for the pulse
width trigger.
Returned Format
[:TRIGger:PWIDth:TPOint] {EPULse | TIMeout}<NL>