Technical data

Table Of Contents
Trigger Commands 33
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 949
:TRIGger:PWIDth:SOURce
Command :TRIGger:PWIDth:SOURce {CHANnel<N> | DIGital<M>}
This command specifies the channel source used to trigger the oscilloscope
with the pulse width trigger.
<N> An integer, 1-4.
<M> An integer, 0- 15. Digital channels are available on mixed-signal
oscilloscopes.
Query
:TRIGger:PWIDth:SOURce?
The query returns the currently defined channel source for the pulse
width trigger.
Returned Format
[:TRIGger:PWIDth:SOURce] {CHANnel<N> | DIGital<M>}<NL>