Technical data

Table Of Contents
Trigger Commands 33
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 937
:TRIGger:EDGE:SLOPe
Command :TRIGger:EDGE:SLOPe {POSitive | NEGative | EITHer}
The :TRIGger:EDGE:SLOPe command sets the slope of the trigger source
previously selected by the :TRIGger:EDGE:SOURce command. The LINE
source has no slope.
Query
:TRIGger:EDGE:SLOPe?
The query returns the currently selected slope for the specified edge
trigger source.
Returned Format
[:TRIGger:EDGE:SLOPe] {POS | NEG | EITH}<NL>