Technical data

Serial Data Equalization Commands 30
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 855
:SPRocessing:DFEQualizer:TAP:GAIN
Command :SPRocessing:DFEQualizer:TAP:GAIN <gain>
The eye diagram drawn after DFE is applied is attenuated. To amplify the
eye back to its original size (so you can directly compare the eye at the
receiver to the eye at the transmitter), a gain factor needs to be applied.
The :DFEQualizer:TAP:GAIN command allows you to set this gain. For
more information on this parameter, refer to the N5461A Infiniium Serial
Data Equalization User's Guide.
<gain> A real number
Example This example sets the gain to 3.23.
myScope.WriteString ":SPRocessing:DFEQualizer:TAP:GAIN 3.23"
Query :SPRocessing:DFEQualizer:TAP:GAIN?
The :SPRocessing:DFEQualizer:TAP:GAIN? query returns the current gain
value.