Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsIniniium 9000
811812813814815816817818819820
Table Of Contents
Serial Bus Commands 28
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 819
:SBUS<N>:SPI:SOURce:FRAMe
Command :SBUS<N>:SPI:SOURce:FRAMe <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:SPI:SOURce:FRAMe command sets the frame source.
<N> CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<M> An integer, 0- 15. Digital channels are available on mixed-signal
oscilloscopes.
Query
:SBUS<N>:SPI:SOURce:FRAMe?
The :SBUS<N>:SPI:SOURce:FRAMe? query returns the current frame source
for the SPI serial frame.
Returned Format
[:SBUS<N>:SPI:SOURce:FRAMe] <source><NL>
See Also • ":SBUS<N>:SPI:SOURce:CLOCk" on page 817
• ":SBUS<N>:SPI:SOURce:MOSI" on page 821
• ":SBUS<N>:SPI:SOURce:MISO" on page 820
• ":SBUS<N>:SPI:SOURce:DATA" on page 818
• ":SBUS<N>:SPI:FRAMe:STATe" on page 816
• ":SBUS<N>:MODE" on page 792