Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsIniniium 9000
811812813814815816817818819820
Table Of Contents
Serial Bus Commands 28
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 817
:SBUS<N>:SPI:SOURce:CLOCk
Command :SBUS<N>:SPI:SOURce:CLOCk <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:SPI:SOURce:CLOCk command sets the source for the SPI
serial clock.
<N> CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<M> An integer, 0- 15. Digital channels are available on mixed-signal
oscilloscopes.
Query
:SBUS<N>:SPI:SOURce:CLOCk?
The :SBUS<N>:SPI:SOURce:CLOCk? query returns the current source for
the SPI serial clock.
Returned Format
[:SBUS<N>:SPI:SOURce:CLOCk] <source><NL>
See Also • ":SBUS<N>:SPI:CLOCk:SLOPe" on page 814
• ":SBUS<N>:SPI:CLOCk:TIMeout" on page 815
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 819
• ":SBUS<N>:SPI:SOURce:MOSI" on page 821
• ":SBUS<N>:SPI:SOURce:MISO" on page 820
• ":SBUS<N>:SPI:SOURce:DATA" on page 818
• ":SBUS<N>:MODE" on page 792