Technical data

806 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
28 Serial Bus Commands
:SBUS<N>:IIC:SOURce:CLOCk
Command :SBUS<N>:IIC:SOURce:CLOCk <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:IIC:SOURce:CLOCk command sets the source for the IIC
serial clock (SCL).
<N> CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<M> An integer, 0- 15. Digital channels are available on mixed-signal
oscilloscopes.
Example This example selects channel 2 as the source for IIC serial clock.
myScope.WriteString ":SBUS1:IIC:SOURce:CLOCk CHANnel2"
Query :SBUS<N>:IIC:SOURce:CLOCk?
The :SBUS<N>:IIC:SOURce:CLOCk? query returns the current source for
the IIC serial clock.
Returned Format
[:SBUS<N>:IIC:SOURce:CLOCk] <source><NL>
See Also • ":SBUS<N>:IIC:SOURce:DATA" on page 807
• ":SBUS<N>:MODE" on page 792