Technical data

Table Of Contents
Serial Bus Commands 28
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 805
:SBUS<N>:IIC:ASIZe
Command :SBUS<N>:IIC:ASIZe <size>
<size> ::= {BIT7 | BIT8}
The :SBUS<N>:IIC:ASIZe command determines whether the Read/Write bit
is included as the LSB in the display of the IIC address field of the
decode bus.
<N> An integer, 1-4.
Query
:SBUS<N>:IIC:ASIZe?
The :SBUS<N>:IIC:ASIZe? query returns the current IIC address width
setting.
Returned Format
[:SBUS<N>:IIC:ASIZe] <size><NL>
See Also ":SBUS<N>:IIC:TRIGger:PATTern:ADDRess" on page 808
":SBUS<N>:MODE" on page 792