Technical data

Serial Bus Commands 28
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 801
:SBUS<N>:CAN:TRIGger:PATTern:DATA:LENGth
Command :SBUS<N>:CAN:TRIGger:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SBUS<N>:CAN:TRIGger:PATTern:DATA:LENGth command sets the
number of 8- bit bytes in the CAN data string. The number of bytes in the
string can be anywhere from 1 bytes to 8 bytes (64 bits). The value for
these bytes is set by the :SBUS<N>:CAN:TRIGger:PATTern:DATA command.
<N> An integer, 1-4.
Query
:SBUS<N>:CAN:TRIGger:PATTern:DATA:LENGth?
The :SBUS<N>:CAN:TRIGger:PATTern:DATA:LENGth? query returns the
current CAN data pattern length setting.
Returned Format
<count><NL>
<count> ::= integer from 1 to 8 in NR1 format
See Also • ":TRIGger:MODE" on page 916
• ":SBUS<N>:MODE" on page 792
• ":SBUS<N>:CAN:TRIGger" on page 798
• ":SBUS<N>:CAN:TRIGger:PATTern:ID:MODE" on page 803
• ":SBUS<N>:CAN:TRIGger:PATTern:DATA" on page 800
• ":SBUS<N>:CAN:SOURce" on page 797
NOTE
You must set the proper :SBUS<N>:MODE, :SBUS<N>:CAN:TRIGger, and
:SBUS<N>:CAN:TRIGger:PATTern:ID:MODE before setting any other trigger values.