Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsIniniium 9000
791792793794795796797798799800
Table Of Contents
Serial Bus Commands 28
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 797
:SBUS<N>:CAN:SOURce
Command :SBUS<N>:CAN:SOURce <source>
<source> ::= {CHANnel<N> | FUNCtion<F> | WMEMory<N> | DIGital<M>}
The :SBUS<N>:CAN:SOURce command sets the source for the CAN signal.
<N> CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
<M> An integer, 0- 15. Digital channels are available on mixed-signal
oscilloscopes.
Query
:SBUS<N>:CAN:SOURce?
The :SBUS<N>:CAN:SOURce? query returns the current source for the CAN
signal.
Returned Format
<source><NL>
See Also • ":SBUS<N>:MODE" on page 792
• ":SBUS<N>:CAN:SIGNal:DEFinition" on page 796