Technical data

Table Of Contents
Serial Bus Commands 28
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 795
:SBUS<N>:CAN:SIGNal:BAUDrate
Command :SBUS<N>:CAN:SIGNal:BAUDrate <baudrate>
<baudrate> ::= a real number from 10E3 to 5E6
The :SBUS<N>:CAN:SIGNal:BAUDrate command sets the standard baud rate
of the CAN signal from 10 kb/s to 5 Mb/s.
If the baud rate you select does not match the system baud rate, false
triggers may occur.
<N> An integer, 1-4.
Query
:SBUS<N>:CAN:SIGNal:BAUDrate?
The :SBUS<N>:CAN:SIGNal:BAUDrate? query returns the current CAN baud
rate setting.
Returned Format
<baudrate><NL>
<baudrate> ::= a real number from 10E3 to 5E6
See Also ":SBUS<N>:MODE" on page 792
":SBUS<N>:CAN:SIGNal:DEFinition" on page 796
":SBUS<N>:CAN:SOURce" on page 797