Technical data

794 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
28 Serial Bus Commands
:SBUS<N>:CAN:SAMPlepoint
Command :SBUS<N>:CAN:SAMPlepoint <value>
<value><NL>
<value> ::= {60 | 62.5 | 65 | 67.5 | 68 | 70 | 72.5 | 75 | 77.5
| 80 | 82.5 | 85 | 87.5} in NR3 format
The :SBUS<N>:CAN:SAMPlepoint command sets the point during the bit
time where the bit level is sampled to determine whether the bit is
dominant or recessive. The sample point represents the percentage of time
between the beginning of the bit time to the end of the bit time.
<N> An integer, 1-4.
Query
:SBUS<N>:CAN:SAMPlepoint?
The :SBUS<N>:CAN:SAMPlepoint? query returns the current CAN sample
point setting.
Returned Format
<value><NL>
<value> ::= {60 | 62.5 | 65 | 67.5 | 68 | 70 | 72.5 | 75 | 77.5
| 80 | 82.5 | 85 | 87.5} in NR3 format
See Also • ":SBUS<N>:MODE" on page 792