Technical data

760 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
27 Root Level Commands
:AUToscale:VERTical
Command :AUToscale:VERTical {CHANnel<N>}
The :AUToscale:VERTical command autoscales the vertical position and
scaling for the corresponding channel without changing anything else (for
example, trigger or timebase settings).
Example This example automatically autoscales the vertical position and scale for
the waveform on Channel 1.
myScope.WriteString ":AUTOSCALE:VERTical CHAN1"
NOTE
If you are using software 2.10 or earlier, the command syntax is (lower-case "t" in
"vertical"):
AUToscale:VERTical <CHANnel 1 | CHANnel 2 | CHANnel 3 | CHANnel 4>