Technical data

Table Of Contents
Measure Commands 25
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 551
:MEASure:FFT:PEAK2
Command :MEASure:FFT:PEAK2 <2nd_peak_number>
The :MEASure:FFT:PEAK2 command sets the peak number of the second
peak for FFT measurements. The source is specified with the
:MEASure:SOURce command as FUNCtion<F> or WMEMory<N>.
<2nd_peak
_number>
An integer, 1 to 100 specifying the number of the second peak.
<N> WMEMory<N> is an integer, 1- 4.
<F> FUNCtion<F> is an integer, 1- 16.
Query
:MEASure:FFT:PEAK2?
The :MEASure:FFT:PEAK2? query returns the peak number currently set
as the second peak.
Returned Format
[:MEASure:FFT:PEAK1] <2nd_peak_number><NL>
See Also :MEASure:FFT:THReshold
Also see the example for :MEASure:FFT:DFRequency in this chapter.