Technical data

Table Of Contents
38 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
1 What's New
Changed
Commands
:MEASure:RJDJ:SCOPe:RJ
(see page 643)
Specifies the removal of the oscilloscope's calibrated random
jitter from the reported RJ.
:SBUS<N> Commands (see
page 789)
For setting up IIC and SPI serial decode and triggering.
Command Description
Command Description
:CHANnel<N>:PROBe:HEAD:
SELect (see page 232)
Now lets you select probe heads by the labels given with the
:CHANnel<N>:PROBe:HEAD:ADD command.
:MEASure:HISTogram:HITS
(see page 555)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:M1S
(see page 556)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:M2S
(see page 557)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:M3S
(see page 558)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MAX
(see page 559)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MEAN
(see page 560)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MEDian
(see page 561)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MIN
(see page 562)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MODE
(see page 563)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:PEAK
(see page 564)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:PP (see
page 565)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:STDDev
(see page 567)
Can now use this command with Meas Histogram math
functions.
:MEASure:RJDJ:ALL (see
page 629)
There are two possible additional measurement results, Scope
RN(rms) and DDPWS.
:TRIGger:MODE (see
page 916)
Added the SBUS1, SBUS2, SBUS3, and SBUS4 selections for
triggering on serial buses.