Technical data

Table Of Contents
360 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
17 Function Commands
:FUNCtion<F>:SQUare
Command :FUNCtion<F>:SQUare <operand>
The :FUNCtion<F>:SQUare command takes the square value of the
operand.
<operand> {CHANnel<N> | DIFF<P> | COMMonmode<P> | FUNCtion<F> |
WMEMory<N> | MTRend | MSPectrum}
See the discussion of possible operands in the introduction to Chapter 17,
“Function Commands,” starting on page 321.
Example This example turns on the square value command using channel 3.
myScope.WriteString ":FUNCtion1:SQUARE CHANNEL3"