Technical data

354 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
17 Function Commands
:FUNCtion<F>:MTRend
Command :FUNCtion<F>:MTRend {MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5}
The :FUNCtion<F>:MTRend command adds a Meas Trend function that
shows measurement values for a waveform (based on measurement
threshold settings) as the waveform progresses across the screen. For
every cycle, a measurement is made, and the value is displayed on the
screen for the cycle.
If a measurement cannot be made for part of a waveform, the trend
function output is a hole (that is, no value) until a measurement can be
made.
<F> An integer, 1-16, representing the selected function.
Example This example sets up a trend function of the first measurement.
myScope.WriteString ":FUNCtion2:MTRend MEAS1"