Technical data

Table Of Contents
What's New 1
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 33
What's New in Version 4.50
New command descriptions for Version 4.50 of the Infiniium 9000 Series
oscilloscope software appear below.
New Commands
Changed
Commands
Command Description
:FUNCtion<F>:ADEMod (see
page 327)
Sets the math function to show the amplitude envelope for an
amplitude modulated (AM) input signal.
:MEASurement<N>:NAME
(see page 743)
Lets you give specific names to measurements displayed on the
oscilloscope's screen.
:MEASurement<N>:SOURce
(see page 744)
Changes the source of an existing measurement.
:MTESt:FOLDing:FAST (see
page 461)
Turns the "Fast, Worst Case Only" real-time eye display option
ON or OFF.
Command Description
:DIGital<N>:THReshold (see
page 275)
There is now the DIFFerential parameter for specifying the
threshold voltage.
:DISK:SAVE:WAVeform (see
page 292)
There is now the H5INt format parameter which saves
waveform data as integers within the H5 file.
:POD<N>:THReshold (see
page 748)
There is now the DIFFerential parameter for specifying the
threshold voltage.