Technical data

Calibration Commands 11
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 185
:CALibrate:SKEW
Command :CALibrate:SKEW CHANnel<N>,<skew_value>
The :CALibrate:SKEW command sets the channel- to- channel skew factor
for a channel. The numeric argument is a real number in seconds, which
is added to the current time base position to shift the position of the
channel's data in time. Use this command to compensate for differences in
the electrical lengths of input paths due to cabling and probes.
<N> An integer, 1-4.
<skew_value> A real number, in seconds.
Example This example sets the oscilloscope channel 1 skew to 1
μs.
myScope.WriteString ":CALIBRATE:SKEW CHANNEL1,1E-6"
Query :CALibrate:SKEW? CHANnel<N>
The :CALibrate:SKEW? query returns the current skew value.
Returned Format
[:CALibrate:SKEW] <skew_value><NL>