Technical data

1048 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
33 Trigger Commands
:TRIGger:ADVanced:VIOLation:PWIDth:SOURce
Command :TRIGger:ADVanced:VIOLation:PWIDth:SOURce {CHANnel<N> | Digital<M>}
This command specifies the channel source used to trigger the oscilloscope
with the pulse width trigger.
<N> An integer, 1- 2, for two channel Infiniium Oscilloscope. An integer, 1- 4, for
all other Infiniium Oscilloscope models.
<level> A real number for the voltage through which the pulse must pass before
the oscilloscope will trigger.
<M> An integer, 0-15. The digital channels are only available on the MSO
oscilloscopes or DSO models with the MSO license installed.
Query
:TRIGger:ADVanced:VIOLation:PWIDth:SOURce?
The query returns the currently defined channel source for the pulse
width trigger.
Returned Format
[:TRIGger:ADVanced:VIOLation:PWIDth:SOURce] {CHANnel<N>|DIGital<M>}<NL>