Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsIniniium 9000
1041104210431044104510461047104810491050
Table Of Contents
Trigger Commands 33
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 1047
:TRIGger:ADVanced:VIOLation:PWIDth:POLarity
Command :TRIGger:ADVanced:VIOLation:PWIDth:POLarity {NEGative|POSitive}
This command specifies the pulse polarity that the oscilloscope uses to
determine a pulse width violation. For a negative polarity pulse, the
oscilloscope triggers when the rising edge of a pulse crosses the trigger
level. For a positive polarity pulse, the oscilloscope triggers when the
falling edge of a pulse crosses the trigger level.
Query :TRIGger:ADVanced:VIOLation:PWIDth:POLarity?
The query returns the currently defined polarity for the pulse width
trigger.
Returned Format
[:TRIGger:ADVanced:VIOLation:PWIDth:POLarity] {NEGative|POSitive}<NL>