Technical data

1042 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
33 Trigger Commands
Advanced Violation Trigger Modes
Violation triggering helps you find conditions within your circuit that
violate the design rules. There are four types of violation triggering: Pulse
Width, Setup and Hold Time, and Transition.
• ":TRIGger:ADVanced:VIOLation:MODE" on page 1043
PWIDth This mode lets you find pulses that are wider than the rest of the pulses
in your waveform. It also lets you find pulses that are narrower than the
rest of the pulses in the waveform.
SETup This mode lets you find violations of setup and hold times in your circuit.
Use this mode to select setup time triggering, hold time triggering, or both
setup and hold time triggering.
TRANsition This mode lets you find any edge in your waveform that violates a rise
time or fall time specification. The Infiniium oscilloscope can be set to
trigger on rise times or fall times that are too slow or too fast.