Technical data

Trigger Commands 33
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 1019
:TRIGger:ADVanced:DELay:EDLY:EVENt:SOURce
Command :TRIGger:ADVanced:DELay:EDLY:EVENt:SOURce {CHANnel<N> | DIGital<M>}
This command sets the Event source for a Delay By Event trigger event.
<N> An integer, 1- 2, for two channel Infiniium Oscilloscope. An integer, 1- 4, for
all other Infiniium Oscilloscope models.
<M> An integer, 0-15. The digital channels are only available on the MSO
oscilloscopes or DSO models with the MSO license installed.
Query
:TRIGger:ADVanced:DELay:EDLY:EVENt:SOURce?
The query returns the currently defined Event source in the Delay By
Event trigger mode.
Returned Format
[:TRIGger:ADVanced:DELay:EDLY:EVENt:SOURce] {CHANnel<N> | DIGital<M>}<NL
>