Technical data

Table Of Contents
Trigger Commands 33
Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference 1017
:TRIGger:ADVanced:DELay:EDLY:ARM:SLOPe
Command :TRIGger:ADVanced:DELay:EDLY:ARM:SLOPe {NEGative|POSitive}
This command sets a positive or negative slope for arming the trigger
circuitry when the oscilloscope is in the Delay By Event trigger mode.
Query
:TRIGger:ADVanced:DELay:EDLY:ARM:SLOPe?
The query returns the currently defined slope for the Delay By Event
trigger mode.
Returned Format
[:TRIGger:ADVanced:DELay:EDLY:ARM:SLOPe] {NEGative|POSitive}<NL>