Technical data

Table Of Contents
1002 Agilent Infiniium 9000 Series Oscilloscopes Programmer's Reference
33 Trigger Commands
Set the Mode
Before Executing
Commands
Before you can execute the :TRIGger:ADVanced:PATTern commands, set the
mode by entering:
:TRIGger:MODE ADVanced and
:TRIGger:ADVanced:MODE PATTern
To query the oscilloscope for the advanced trigger mode, enter:
:TRIGger:ADVanced:MODE?
The :TRIGger:ADVanced:PATTern commands define the conditions for the
Pattern Trigger Mode. As described in the following commands, you set up
the :TRIGger:ADVanced:PATTern commands with the following commands
and queries:
":TRIGger:ADVanced:PATTern:CONDition" on page 1003
":TRIGger:ADVanced:PATTern:LOGic" on page 1004
":TRIGger:ADVanced:PATTern:THReshold:LEVel" on page 1005
":TRIGger:ADVanced:PATTern:THReshold:POD<N>" on page 1006