Technical data


61
Agilent Infiniium 9000 Series Oscilloscopes
Evaluation Guide
11
Segmented Memory
Agilent’s segmented memory feature can optimize your oscilloscope’s
acquisition memory, allowing you to capture more selective signal
details with less memory and then easily view all captured waveforms
and scroll through each individual waveform segment.
Make connections and perform initial setup:
1 To power the demo board, connect a USB cable between it and the
Agilent Infiniium 9000 Series oscilloscope.
You can also apply power by connecting the oscilloscope’s MSO
cable to the demo board’s 40-pin connector.
2 Connect the scope channel 1 probe to demo board CH1 and GND.
3 Connect the scope channel 2 probe to demo board CH2 and GND.
4 Connect the MSO cable between the oscilloscope and the demo
board’s 40-pin connector.
5 Turn the SELECT switch to position 6 (SPI).
6 Press [Default Setup].
7 Press [AutoScale].
8 Set the time base to 1 ms/div.
9 Press [Single].
Set acquisition options:
10 From the on-screen main menu, choose Setup>Acquisition....