Technical data

8 SPI
52 Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide
As you move the blue vertical marker in the waveform display, it
tracks in the protocol viewer window.
As you click on rows in the protocol viewer, the blue marker shows
the exact associated time in the waveform menu.
SPI Using Analog Channels
You can also capture SPI signals by connecting the oscilloscope’s
analog channels to the proper signals on the demo board’s 40-pin
connector.
Make connections and perform initial setup:
1 To power the demo board, connect a USB cable between it and the
Agilent Infiniium 9000 Series oscilloscope.
2 Connect the scope analog channel probes to pins on the demo
board’s 40-pin connector: