Technical data

6 USB
42 Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide
USB High-Speed Capture
Make connections and perform initial setup:
24 Connect a high speed storage device to the USB-A connector on
the demo board.
Most recent thumb drives make excellent devices for this.
25 Connect an InfiniiMax differential probe with socketed probe head
adapter to the demo board’s USB high-speed connector. Use
oscilloscope channel 3.
This connection has built-in 82 ohm termination. The posts are 20
mil and they accept the socketed probe head adapter without any
additional termination.
26 Press [Default Setup].
27 Press [AutoScale].
Set up serial decode:
28 Choose Setup>Serial Decode....