Technical data

6 USB
38 Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide
Here’s the associated protocol view. Select the Payload tab. The
data packets include X-Y coordinates that were transmitted when
you moved the mouse.
Move the mouse and see the X-Y coordinate information change in
the Payload tab.
USB Full-Speed Capture
Make connections and perform initial setup:
12 Disconnect the mouse from the demo board USB-A port.
13 Connect a full-speed device to the USB-A connector on the demo
board.
Full speed hubs or older thumb drives make ideal candidates.
14 Press [Default Setup].
15 Press [AutoScale].
You are now viewing full-speed serial traffic between the
full-speed device and the PC in the oscilloscope.