Technical data

Uncovering Signal Anomalies with Responsive Deep Memory 3
Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide 27
In this lab, a stable trigger is accomplished by triggering on the
synchronization signal on channel 2. In the absence of a
synchronization signal, trigger holdoff can be used to achieve a
stable trigger (see Appendix A).
7 Turn off the channel 2 display (still the trigger source) by pressing
the [2] key.
8 Re-adjust channel 1’s vertical scale to 500 mV/div and its vertical
position to 2.3 V offset to optimize viewing of the complex
channel 1 signal.
9 Set the time base to 100 µs/div.
Note that there is a glitch present in every other envelope.
10 Press [Single] to capture a single shot acquisition of this complex
waveform.
Press