Technical data

1 Getting Started
20 Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide
The quick measurement data appears in the bottom portion of the
screen.
Note that the [Multi Purpose] key can also be customized to:
• QuickPrint — to print the screen image.
• QuickScreen — to save the screen image to a file.
• QuickSetup — to load a setup file.
• QuickWaveform — to save waveform data.
• QuickExecute — to run a program.
Using Markers
1 Press the [Markers] key on front panel. Horizontal (Ax and Bx)
and Vertical (Ay and By) markers can be positioned on the
waveform to measure time or volts of interest.
2 For example, in the Markers Setup dialog, select Manual
Placement from the drop-down, and click Close (or press
[Markers] again).