Technical data

Getting Started 1
Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide 15
Vertical Controls
1 Press [AutoScale] to return to simple setup.
2 Turn the large
channel 1 (yellow)
Vertical scale knob to
control the V/div
setting.
The V/div setting is
displayed at the top
of the screen for
each channel.
Knobs are color
coded to match the
waveform color.
Push the vertical
scale knob for vernier
fine adjustment.
3 Press the [1] key to
turn the channel off.
Press [1] again to
turn the channel on.
4 Turn the small
channel 1 (yellow)
Vertical position
knob to control the offset position of the waveform, moving it up or
down.
Press