Technical data

Getting Started 1
Agilent Infiniium 9000 Series Oscilloscope Evaluation Guide 13
Run Control
When the oscilloscope is turned on, or if [AutoScale] is pressed, the
acquisition will be set to [Run]. At any time, you may [Stop] the
acquisition process to examine a signal in detail or to save it.
1 Press [AutoScale] to return to simple setup.
2 Set the time base to 2 ms/div.
3 Press the [Single] key to make a single acquisition and stop the
acquisition process.
4 Use the large Horizontal scale knob to zoom in on the waveform.
Press for
single run