User`s guide

2 Initial Setup
58 InfiniiVision Oscilloscopes User’s Guide
To set up the screen saver
The oscilloscope can be configured to turn on a display screen saver when the
oscilloscope has been idle for a specified length of time.
1 Press [Utility]&Options&Preferences&Screen Saver to display the Screen Saver
Menu.
2 Press the Saver softkey to select the screen saver type.
The screen saver can be set to Off, to display any of the images shown in the list, or
can display a user-defined text string.
If User is selected, press the Spell softkey to select the first character of the text
string. Use the Entry knob to choose a character. Then press the Enter softkey to
advance to the next character and repeat the process. The resultant string is displayed
in the “Text =” line above the softkeys.
3 Turn the Entry knob to select the number of minutes to wait before the selected screen
saver activates.
When you turn the Entry knob, the number of minutes is displayed in the Wait softkey.
The default time is 180 minutes (3 hours).
Screen saver
image
Screen saver
time delay
Return to
previous menu
Preview
Select
characters
Advance to next
character
List of characters displayed
when Entry knob is turned
User-defined
text string