User`s guide

Serial Decode/Lister 10
InfiniiVision Oscilloscopes User’s Guide 293
Lister
Lister is a powerful tool for investigating protocol failures. You can use Lister to view large
amounts of packet level serial data in a tabular format, including time tags and specific
decoded values. After pressing the [Single] key, you can rotate the Entry knob to select
an event and press the Zoom to Selection softkey to jump to the event.
To use the Lister:
1 Set up trigger and decode on the serial data signals to be analyzed. Instructions for
triggering on serial protocols are in “Triggering” on page 81. Instructions for setting
up serial decode are in this chapter (starting with “CAN Serial Decode” on page 295).
2 Press [Acquire]&Serial Decode&Lister.
3 Press Lister Display to enable the display.
Before you can select a row or navigate through the Lister data, oscilloscope
acquisitions must be stopped.