User`s guide

7 Printing and Saving
254 InfiniiVision Oscilloscopes User’s Guide
Format (ALB data file format settings in Save Menu)
You can acquire data from the oscilloscope in ALB format, then analyze it offline (on a PC)
using the Agilent B4610A Data Import Tool for Offline Viewing and Analysis. See Agilent
publication number 5989-7834EN at www.Agilent.com.
When you choose any ALB format other than Default, waveforms from the analog
channels (if displayed) are also digitized and displayed as digital waveforms. The analog
channel’s trigger level determines the point at which the voltage is considered a logic 1 or
0.
Available ALB serial formats include:
• Default
• CAN
• I2C
• LIN
• UART/RS232
• SPI (2 Wire Serial)
• SPI (3 Wire Serial)
• SPI (4 Wire Serial)
To select a serial format for the ALB data file:
1 Press [Save/Recall]&Save.
2 Press Format and select ALB.
3 Press Settings.
4 Press Format and select the format for the ALB data file.
If you connect your serial bus signals to the oscilloscope as shown in the following table,
the labels in the analysis software will be correct. If you do not, then you will have to
re-map the signals in the analysis software.