User`s guide

7 Printing and Saving
252 InfiniiVision Oscilloscopes User’s Guide
The Invert Graticule Colors option can be used to reduce the amount of black ink it takes
to print oscilloscope images by changing the black background to white. Invert Graticule
Colors is the default mode. Invert Graticule Colors is available when the BMP and PNG
formats are selected.
Palette
Press the Palette softkey to change the following options. The Palette options are
available when the BMP and PNG formats are selected.
• Color — When Color printing is selected, the traces are printed in color. Color printing
is not applicable to CSV format.
•Grayscale — When Grayscale printing is selected, the traces are printed in shades of
gray rather than in color. Grayscale printing is not applicable to CSV format.
Length Control
The Length softkey is available when the CSV, ASCII XY, BIN, or ALB formats are
selected. Length sets the number of data points that will be output to the file. Length can
be set to 100, 250, 500, or 1000 when the acquisition is running, or more when the
acquisition is stopped. (CSV length is limited to 1000 points.) It is important to save
enough points to represent the captured data accurately. Press the [Single] key to obtain
the maximum record length.
The maximum available record length depends on whether one or two channels are
active (turned on) per channel pair (channel pairs are channels 1 and 2 and channels 3
and 4), whether digital channels are on or off, and the horizontal timebase setting (how
much data is shown on screen).
Only displayed data points are output (except when you are using segmented memory
and the Save Segment control is set to All segments). Therefore, adjust the Horizontal
controls to display the data you want to save.
Graticule Not Inverted Graticule Inverted