User`s guide

7 Printing and Saving
248 InfiniiVision Oscilloscopes User’s Guide
Selecting a Destination for Your Saved Data
Press [Save/Recall]&Save to access the Save Menu and select a destination for saving
your data.
Press to go/Location/Save to softkey
(Using the oscilloscope’s File Explorer)
The second softkey from the left in the Save Menu is the file explorer softkey.
If no USB mass storage device is connected to the oscilloscope, you will only be able to
save Trace and Setup files to the oscilloscope’s internal memory. You will not be able to
save display image files or waveform data files as described on page 250 unless a USB
mass storage device is connected.
Rotate the Entry knob to align the selection arrow with “C:” and push the Entry knob to
select it. Then rotate and push the Entry knob to select the “setups” directory, then select
a file (intern_n) to be overwritten.
NOTE
The File Explorer in the Save and Recall Menus can be used to save the following file
types: oscilloscope setup, waveform trace, display image and waveform data. It can be
used to recall oscilloscope setup and waveform trace files.
The File Explorer in the Utility Menu can be used for loading files into the oscilloscope or
deleting files.